Shipping and Receiving

Component List

The following equipment is necessary for successful installation of the Dimension Icon SPM system. Verify the following is on-hand before beginning installation:

Equipment Received

• Electronic copy of the Dimension Icon Instruction Manual (this document)
• Training Manual
• Dimension Stage Controller
• Dimension Icon Microscope
• Dimension Icon Microscope scanner. Do not remove the SPM scanner from the foam padded shipping box yet.
• NanoScope V Controller
• Computer
• 30” LCD Monitor (Dimension Icon or Dimension Icon-PT) or two 19” LCD Monitors (Dimension Icon-PI)
• Hard Drive Back-up on DVD
• Mouse, Keyboard and Trackball
• Dimension Accessories Kit
• Cantilever Stand
• Probe Holders (2)
• 20 Silicon Nitride probes (model DNP-20) and 10 TappingMode probes.
• Wafer Handling Tool Kit
• Calibration Standard
• Vibration Isolation Pad. The optional integrated vibration isolation table/acoustic enclosure is strongly recommended (Model AVH-1000).
• Power distribution box
• 8" Sample Chuck (option)

Cables Received

• NS V Controller-to-Dimension Icon Cables
• Dimension Icon DC Power Cable
• Power Cords (3)
• Serial Cable, 9-pin D, 12'
• Serial Cable, 9-pin D, 6' (3)
• Vacuum Hose Assembly
• SCSI cable (NanoScope V Controller to PC)
• USB cable (NanoScope V-PI Controller to PC)

Tools Received

• Ratchet wrench, 1/4” hex
• Insert bit, #2 Phillips 1/4” hex
• Screwdriver, #1 Phillips
• L-key ball hex set english, 10 pieces
• 1/2” open end wrench
• Screwdriver, 3/16” slotted blade
• Miniature screwdriver, Phillips
• L-key, 4mm hex
• L-key, 5mm hex
• Foam tape, 2-sided, black

Open topic with navigation